Urban Lube Canada

.
  • Facebook
  • Instagram
  • Twitter
  • Book Appointment
  • Offers
    • Tire Rebate Offers 2025
    • May Deals and Offers 2025
    • Best Tire Deals
    • E-Gift Cards
  • Services
    • Oil Change Calgary
    • Fleet Services
    • Battery Boost and Replacement
    • Auto Repair Calgary
  • Heavy Duty
  • Franchise
    • Franchise Opportunities
    • Franchisee Application
  • Contact
    • About

How to Boost a Car Battery with a Booster Pack?

January 30, 2020 by Hardik K

The traditional way to boost a dead battery is using a jumper cable. However, the latest vehicles do not support this method of boosting the battery. Read on to learn about the smart way of boosting a car battery.

The latest method of boosting a dead battery is a battery booster pack, which is also known as a power pack. It provides low power for long periods which not only boosts the battery, but it also assures to not damage any electrical components of the car. This type of car battery booster can be used to boost a slightly discharged battery.

Stepwise Guide To Boosting Car Battery With A Booster Pack:

1. Position The Car

Position the car in a way that cables can easily reach the discharged battery.

2. Switch Off Electrical Accessories

Switch off all electrical accessories and lights of the car.

3. Connect Clamps

The next step is to connect clamps. Connect the negative clamp to the chassis grounding point or to the metallic engine component. Connect the positive clamp to the positive terminal of your car battery. A majority of cars show a warning light, in case, the connection is made in a reverse manner which is wrong. If you see the warning light, reverse the order of the connection.

4. Start Vehicle Now

Start your vehicle now. If your car starts in the first attempt, your battery booster process with the battery pack is performed. However, if the car does not get started, you need to wait for a minute before trying to start it again.

5. Remove Clamps

Once the car is started, you are done. The next step is removing the clamps. Please remove the negative cable, followed by the positive cable.

This process boosts your car battery and will get you going. When you are performing a car battery booster in the Canada process, make sure to read instructions on the battery pack. If there are some instructions on the booster pack, follow the same. Following these instructions will assure that you do not damage any electrical components of your car.

Also, once the battery of your car is boosted, you must boost the booster pack so you can use it again, as and when needed.

If even after performing battery booster if your car does not start, test the battery to see if there is any hope to start it again by following the below-mentioned steps:

  1. Switch on the dorm light and try to start the car again. If it dims, you have the hope to boost the battery.
  2. Check the voltage of your battery, if you have the required tools to do that.

If you see, none of the signals shows any possibility of boosting the battery, you need to replace it with the help of a professional.

Read Next Blog:

Common Signs That Indicate You Need Battery Replacement

Guide to Use Booster Pack To Jumpstart Your Car

Filed Under: Battery Booster Tagged With: battery booster, battery booster pack, car battery booster, car booster pack

Urban Lube

Email: Click Here
Schedule an Appointment
FAQs / Common Questions
Pinterest
YouTube

Learn More

Our Complete List of Services
Urban Lube Offers
Terms and Condition
AG Vehicles
Blog

 

© 2025 Urban Lube Ltd. - All Rights Reserved - Sitemap